Metre
Doors, furniture & rooms

How to measure a room's square footage (m²) with your phone

By the Metre team · Updated · 3 min read

What you need

  • A phone or a tape measure
  • The room cleared enough to see the corners where the walls meet the floor

Step by step

  1. Measure along the floor

    Measure each wall where it meets the floor. Corners are easier to find there than on the ceiling, and furniture seldom hides them.

  2. Multiply length by width

    Convert inches to feet first: 13 ft 9 in is 13.75 ft, 11 ft 10 in is 11.83 ft, and 13.75 × 11.83 is 162.7 sq ft.

  3. Split odd shapes

    For an L-shaped room, draw two or three rectangles, measure each one and add the areas. Do not count the same square twice where they meet.

  4. Decide what counts

    Net area is the floor you can walk on. Total area adds walls and anything else you choose to include. Balconies, terraces, gardens and garages are normally left out of the living area.

  5. Write the total in both units if you need them

    Multiply square metres by 10.764 for square feet, or multiply square feet by 0.0929 for square metres.

Square metres to square feet

m²sq ft
10107.6
12129.2
15161.5
20215.3
25269.1
50538.2
1001,076.4

Square footage for flooring, paint or air conditioning

For flooring, use the floor area and add 5 to 10 % for cuts and waste. For paint, you need the wall area (perimeter × height), not the floor area. For air conditioning and heating, the floor area and ceiling height (volume) are what the sizing guides ask for.

Is it an official figure?

No. A measured floor area is an estimate for planning, buying flooring or paint, or comparing homes. Contracts, rent and sales have their own rules for what counts, so confirm those with a tape and the official method.

Do it with Metre

Home survey Pro

  1. Open Home survey, add a room and sweep the phone slowly over the floor.
  2. Aim at each corner where the walls meet the floor and tap +. Furniture hiding a corner? Aim where the two walls would meet.
  3. Tap Done, then Use this room, and name the room. Metre shows the area in m² or sq ft.

Home survey keeps net and total area apart and leaves balconies, terraces, gardens and garages out of the net area by default. The Length tool measures each wall if you would rather multiply yourself.

Download Metre on the App Store

iPhone and iPad, iOS 17 or later. Get Metre on the App Store.

How accurate is this?

Measuring a room by its corners is an estimate: the result depends on light, how well each corner is placed and how steadily you hold the phone. Metre shows a margin of error and a quality label, and a green precision ring tells you before you tap whether a point is reliable. Confirm the areas with a tape before anything binding.

Measurements made with a phone are estimates. Before you cut, order or build, confirm critical dimensions with a physical tape.

Questions people ask

How do I calculate the square footage of a room?

Multiply the length by the width in feet. For feet and inches, convert the inches to a fraction of a foot first. For L-shaped rooms, add the areas of the rectangles.

How do I convert m² to sq ft?

Multiply by 10.764. A 15 m² room is 161.5 sq ft. To go the other way, multiply square feet by 0.0929.

Can an iPhone measure a room without LiDAR?

Yes. Home survey works on any iPhone or iPad with iOS 17 or later. Only the automatic 3D room scan needs a LiDAR scanner.

Does Home survey need Metre Pro?

Yes. Home survey is part of Metre Pro, which also includes the Length tool for single walls. The monthly plan starts with a 3-day free trial.

Related guides

All how-to guides · 50 animated demos in the app