Will my sofa fit through the door? How to check before you buy
What you need
- Width, depth and height of the item (from the shop listing or a tape)
- The clear width and height of every doorway on the route
- The floor space where it will stand
Step by step
Write down the item's three sizes
Length, depth and height, including the arms, legs and any cushions that cannot be removed. Listings often give the overall size, which is the one you need.
Measure the narrowest doorway on the route
Measure the clear opening inside the frame with the door open: the smallest of three widths, and the height to the underside of the frame. Do the same for the front door, the hall, the stairwell and any lift.
Try both orientations
Compare the item's two smallest sizes with the opening's width and height, upright and then on its end. If one orientation fits with 2 to 3 cm to spare, the doorway is fine. Removing legs, arms or the door leaf often gains the last centimetres.
Check turns and stairs
A long item needs room to pivot. Landings, low ceilings over stairs and tight corners stop more furniture than doors do.
Place a true-size box where it will stand
Type the width, depth and height into an AR box and put it on the floor. Walk round it and leave at least a stride to walk past it.
A quick way to think about it
Picture the item's cross-section, the shape you see when you look at it from the end. That rectangle (for a sofa: depth by height) is what has to pass through the doorway rectangle. The length only matters at turns.
Do it with Metre
Will it fit? and Door check Pro
- Use Door check to measure the doorway, then Will it pass through? with the furniture size.
- Open Will it fit?, type the furniture's width, depth and height from the shop listing, point at the floor where it would stand and tap +.
- Walk round the box, drag it to move it, use the rotate button to try it at an angle and check the gap to the walls.
Save scanned doors and Metre can tell you, for each saved door, whether new furniture passes. Metre does not know about stairs or lifts, so measure those with a tape.
iPhone and iPad, iOS 17 or later. Get Metre on the App Store.
How accurate is this?
Phone measurements are estimates and every Metre result carries a margin of error. When the fit is tight, treat the answer as a prompt to measure again with a tape rather than a guarantee, especially before an order you cannot return.
Measurements made with a phone are estimates. Before you cut, order or build, confirm critical dimensions with a physical tape.
Questions people ask
What is the rule for getting a sofa through a door?
The sofa's two smallest dimensions must fit inside the clear opening of the door, in at least one orientation, with a small margin. Length matters only when the item has to turn.
How much space should I leave around a sofa?
Leave at least a stride, roughly 60 to 75 cm (24 to 30 in), where people walk past it, and enough room for doors and drawers to open.
Can I check this in a shop before I buy?
Yes. Type the size from the label or listing into Will it fit? and place the box in your room, or check it against your saved doors.
Do I need a LiDAR iPhone?
No. Every tool except 3D room scan works on any iPhone or iPad with iOS 17 or later.
Related guides
- How to measure a door opening with an iPhoneClear width and height of a doorway, and what to leave spare.
- How to measure a room's square footage (m²) with your phoneLength times width, odd shapes and a m² to sq ft table.
- How accurate are phone measuring apps? What to expect and how to testWhat affects the error, which jobs are fine, and a 20-second test.